Induction Heating Vacuum Metallized Machine
☑ Both evaporation section and wire-feeding section can be moved out from rear of vacuum chamber so achieve high pumping speed, more energy saving and excellent vacuum condition.
☑ The special design of moving evaporation section and wire-feeding section can increase output owing to less leakage in the metallizer and quicker boats change.
☑ The uniformity is excellent and metallic gloss is beautiful owing to the special design.
Products Introduction
Application
This machine is used for evaporation of aluminum on the surface of Roll material, which is suitable for gold and silver wire coating, gold drawing wire coating, high barrier packaging materials, etc.
Features
Special research and development with latest innovation design, the use of graphite crucible evaporation source, eliminate the drawbacks of traditional evaporation process, pinhole rate is very low, fully meet the gold and silver wire coating.
Ultra-thick coating, aluminum layer thickness can reach more than 800 Å , suitable for special requirements of medical packaging.
control section
☑ The metallizer features a high quality Siemens PLC paired with a 12″ Siemens color HMI, enabling fully digitized parameter visualization and intuitive human-machine interaction.
☑ Key Advantage: One-touch factory parameter restoration. Protective devices for leakage and high temperature in both booster pump and diffusion pump systems.
Vacuum section
☑ Combining high speed pumping efficiency, excellent vacuum condition, with intelligent automation, the system utilizes high quality cryogenic traps and Siemens PLC technology to maintain optimized performance through continuous monitoring and control under any climate environment.
Model | TB-1000G | TB-1350G | TB-1500G | TB-1800G | TB-2200G | TB-2500G |
Web width(mm) | 1000 | 1350 | 1500 | 1800 | 2200 | 2500 |
Max. unwind dia.(mm) | Φ700-φ800，φ800-φ1000 | |||||
坩埚数量Graphite crucible(pc) | 6 | 8 | 9 | 11 | 13 | 15 |
Winding peed(m/min) | 500-750m/min | |||||
Ultimate vacuum(Pa) | 4X10-2Pa(3X10–4mbar) | |||||
Working power(Kw) | 170 | 190 | 220 | 240 | 300 | 325 |
Excellent for materials | 10μm-80μm | |||||
* Note: The pictures and parameters of machine just for a reference and subject to the actual configuration.